Game:bit
来自Labplus盛思维基百科
概述
microbit拓展游戏手柄。拥有丰富的输入按键、双轴游戏摇杆、震动马达、无源蜂鸣器。结合microbit可以有多样的玩法,增加microbit编程的趣味性!
技术参数
- 输入电源:3V(2节7号干电池)
- PCI插槽可插入microbit作主控
- 拥有丰富的按键、双轴摇杆、震动马达、无源蜂鸣器
使用教程
game:bit | 说明 | micro:bit引脚 | Python示例 |
---|---|---|---|
双轴按键游戏摇杆 | 三路模拟输出,输出值分别对应(X,Y)双轴偏移量和Z轴上按下的输出模拟量800~850,松开输出模拟量1023 | X轴->P2 Y轴->P1 Z按键->P0 |
获取x轴偏移量: pin2.read_analog() 获取z按键模拟量: pin0.read_analog() |
Y/X/B/A按键 | 当Y按下按键输出模拟量0~50, 松开输出模拟量1023 当X按下按键输出模拟量200~250, 松开输出模拟量1023 |
P0 | pin0.read_analog() |
「START」按键 | 「START」按键连接microbit的BUTTON_A,功能与microbit的A按键功能相同 | BUTTON_A(P5) | button_a.is_pressed()==True #当「START」按键按下 |
「SElECT」按键 | 「SElECT」按键连接microbit的BUTTON_B,功能与microbit的B按键功能相同 | BUTTON_B(P11) | button_b.is_pressed()==True #当「SELECT」按键按下 |
震动马达 | 输入高电平,触发震动马达,低电平停止震动 | P16 | Pin16.write_digital(1) #震动开启 Pin16.write_digital(0) #停止震动 |
无源蜂鸣器 | 设置频率或音阶,可发出对应频率的电子声音 | P8 | music.pitch(1000,1000,pin8) #蜂鸣器发出1KHz,持续1秒的声音 |
应用示例
无线遥控器
可利用microbit的无线功能,发送game:bit的按键数据。另外一块microbit接收数据后,作出响应。达到无线遥控的功能。可应用在无线遥控手柄的场景上。
- game:bit & micro:bit发送端程序:
from microbit import * import radio def getKeyVal(): key = 0 btVal = pin0.read_analog() if (btVal < 70): key = 1 # button Y elif (btVal < 270 and btVal > 130): key = 2 # button X elif (btVal < 470 and btVal > 330): key = 3 # button B elif (btVal < 670 and btVal > 530): key = 4 # button A elif (btVal < 870 and btVal > 730): key = 5 # rocker button if button_a.is_pressed(): key = 6 # button start if button_b.is_pressed(): key = 7 # button select return key radio.config(length=32, queue=3, channel=7, power=0, data_rate=radio.RATE_1MBIT) radio.on() while True: sendBuff = [0,0,0,0,0,0] tmp = pin2.read_analog() # axix x sendBuff[0] = tmp & 0xff sendBuff[1] = (tmp >> 8) & 0xff tmp = pin1.read_analog() # axis y sendBuff[2] = tmp & 0xff sendBuff[3] = (tmp >> 8) & 0xff tmp = getKeyVal() # button val sendBuff[4] = tmp & 0xff sendBuff[5] = (tmp >> 8) & 0xff radio.send_bytes(bytearray(sendBuff)) #print(sendBuff) sleep(50)
- micro:bit接收端程序:
from microbit import * import radio radio.config(length=32, queue=3, channel=7, power=0, data_rate=radio.RATE_1MBIT) radio.on() while True: tmp = radio.receive_bytes() if (tmp != None): x = (tmp[1]<<8)|tmp[0] y = (tmp[3]<<8)|tmp[2] key = (tmp[5]<<8)|tmp[4] #print(x) #print(y) #print(key)