“温湿度”的版本间的差异
来自Labplus盛思维基百科
Labplus课程组(讨论 | 贡献) (→MicroPython示例) |
Labplus课程组(讨论 | 贡献) (→图形化示例) |
||
第88行: | 第88行: | ||
=== 图形化示例 === | === 图形化示例 === | ||
+ | <br/><br/> | ||
+ | |||
+ | :::{| | ||
+ | |- | ||
+ | | [[文件:温湿度.png|600px|center|无框]] | ||
+ | |} | ||
+ | |||
== 版本历史记录 == | == 版本历史记录 == | ||
2018年4月20日 (五) 15:11的版本
概述
基于SHT20数字温湿度传感器集成IC。用于检测环境温湿度,具有极高的可靠性和长期稳定性。采用I2C通讯方式,操作简便。
技术参数
- 工作电压:VCC 3.3-5V
- I2C数字信号输出
- 温度测量范围:-40~125℃
- 温度测量精度:±0.3℃
- 湿度测量范围:0~100%RH
- 湿度测量精度:±3%RH
- 模块尺寸:24x46x7.5mm
引脚定义
VCC | 电源 |
SDA | I2C数据 |
SCL | I2C时钟 |
GND | 地 |
使用教程
连接示意图
Arduino示例
//程序功能:读取当前的温湿度值// #include <Wire.h> #include "SHT20.h" SHT20 sht20; void setup() { Serial.begin(9600); Serial.println("SHT20 Example!"); sht20.initSHT20(); // Init SHT20 Sensor delay(100); sht20.checkSHT20(); // Check SHT20 Sensor } void loop() { float humd = sht20.readHumidity(); // Read Humidity float temp = sht20.readTemperature(); // Read Temperature // Serial.print("Time:"); // Serial.print(millis()); Serial.print(" Temperature:"); Serial.print(temp, 1); Serial.print("C"); Serial.print(" Humidity:"); Serial.print(humd, 1); Serial.print("%"); Serial.println(); delay(1000); }
MicroPython示例
//程序功能:利用数码管分别显示温度和湿度的值// from microbit import * #@import bluebitDigitCube tm1650Init() def getTemp(): i2c.write(0x40,bytearray([0xE3])) sleep(85) t=i2c.read(0x40,2) return -46.86+175.72*(t[0]*256+t[1])/65535 def getHumi(): i2c.write(0x40,bytearray([0xE5])) sleep(40) t=i2c.read(0x40,2) return -6+125*(t[0]*256+t[1])/65536 while True: tm1650DisplayInt(getTemp()) sleep(3000) tm1650DisplayInt(getHumi()) sleep(3000)
图形化示例
版本历史记录
Version | Date | Note [+]新增[-]删除[^]修复 |
---|---|---|
V2.0 |