“温湿度”的版本间的差异
来自Labplus盛思维基百科
Labplus课程组(讨论 | 贡献) |
Labplus课程组(讨论 | 贡献) |
||
第26行: | 第26行: | ||
== 使用教程 == | == 使用教程 == | ||
− | + | === Arduino示例 === | |
+ | [http://wiki.labplus.cn/index.php?title=文件:SHT20_test.rar 温湿度库下载] | ||
+ | <pre style="color:blue"> | ||
+ | //程序功能:读取当前的温湿度值// | ||
+ | #include <Wire.h> | ||
+ | #include "SHT20.h" | ||
+ | SHT20 sht20; | ||
+ | void setup() | ||
+ | { | ||
+ | Serial.begin(9600); | ||
+ | Serial.println("SHT20 Example!"); | ||
+ | sht20.initSHT20(); // Init SHT20 Sensor | ||
+ | delay(100); | ||
+ | sht20.checkSHT20(); // Check SHT20 Sensor | ||
+ | } | ||
+ | void loop() | ||
+ | { | ||
+ | float humd = sht20.readHumidity(); // Read Humidity | ||
+ | float temp = sht20.readTemperature(); // Read Temperature | ||
+ | // Serial.print("Time:"); | ||
+ | // Serial.print(millis()); | ||
+ | Serial.print(" Temperature:"); | ||
+ | Serial.print(temp, 1); | ||
+ | Serial.print("C"); | ||
+ | Serial.print(" Humidity:"); | ||
+ | Serial.print(humd, 1); | ||
+ | Serial.print("%"); | ||
+ | Serial.println(); | ||
+ | delay(1000); | ||
+ | } | ||
+ | </pre> | ||
=== MicroPython示例 === | === MicroPython示例 === | ||
<pre style="color:blue"> | <pre style="color:blue"> |
2018年4月20日 (五) 17:25的版本
概述
基于SHT20数字温湿度传感器集成IC。用于检测环境温湿度,具有极高的可靠性和长期稳定性。采用I2C通讯方式,操作简便。
技术参数
- 工作电压:VCC 3.3-5V
- I2C数字信号输出
- 温度测量范围:-40~125℃
- 温度测量精度:±0.3℃
- 湿度测量范围:0~100%RH
- 湿度测量精度:±3%RH
- 模块尺寸:24x46x7.5mm
引脚定义
VCC | 电源 |
SDA | I2C数据 |
SCL | I2C时钟 |
GND | 地 |
使用教程
Arduino示例
//程序功能:读取当前的温湿度值// #include <Wire.h> #include "SHT20.h" SHT20 sht20; void setup() { Serial.begin(9600); Serial.println("SHT20 Example!"); sht20.initSHT20(); // Init SHT20 Sensor delay(100); sht20.checkSHT20(); // Check SHT20 Sensor } void loop() { float humd = sht20.readHumidity(); // Read Humidity float temp = sht20.readTemperature(); // Read Temperature // Serial.print("Time:"); // Serial.print(millis()); Serial.print(" Temperature:"); Serial.print(temp, 1); Serial.print("C"); Serial.print(" Humidity:"); Serial.print(humd, 1); Serial.print("%"); Serial.println(); delay(1000); }
MicroPython示例
//程序功能:利用数码管分别显示温度和湿度的值// from microbit import * #@import bluebitDigitCube tm1650Init() def getTemp(): i2c.write(0x40,bytearray([0xE3])) sleep(85) t=i2c.read(0x40,2) return -46.86+175.72*(t[0]*256+t[1])/65535 def getHumi(): i2c.write(0x40,bytearray([0xE5])) sleep(40) t=i2c.read(0x40,2) return -6+125*(t[0]*256+t[1])/65536 while True: tm1650DisplayInt(getTemp()) sleep(3000) tm1650DisplayInt(getHumi()) sleep(3000)
图形化示例
版本历史记录
Version | Date | Note [+]新增[-]删除[^]修复 |
---|---|---|
V2.0 |