“电流传感器”的版本间的差异

from mpython import *                   # 导入mpython
import bluebit                          # 导入bluebit 模块

meter=bluebit.DelveBit(0x60)            # 实例模块,根据实际I2C地址修改

while True:
    value = meter.common_measure()      # 测量
    print("measure: %f" %value)
    sleep_ms(200)

#include <Wire.h>
int reading = 0;
void GetSensorValue(char address)
{
    Wire.requestFrom(address, 2); 
    if (2 <= Wire.available())
    {
       reading = Wire.read();  // receive high byte (overwrites previous reading)
       reading = reading << 8;    // shift high byte to be high 8 bits
       reading |= Wire.read(); // receive low byte as lower 8 bits
       Serial.println(reading);   // print the reading
    } 
}

void setup()
{
  Wire.begin();        // join i2c bus (address optional for master)
  Serial.begin(9600);  // start serial for output
}

void loop()
{
   GetSensorValue(0x63);
}