斜不胜正灯

来自Labplus盛思维基百科
Tangliufeng讨论 | 贡献2018年5月29日 (二) 13:54的版本
跳转至: 导航搜索
斜不胜正灯.png

概述

本作品可通过触发倾斜传感器改变彩色RGB灯带颜色。使用时先根据制作说明将作品组装完整,然后接上 电源(9V电池或USB供电),打开主控板开关,触发倾斜传感器即可。本作品用倾斜传感器作为输入装置, 彩色RGB灯带作为输出装置,可自行编程改变颜色、变换方式、灯带数量等。DIY动手组装,锻炼动手能 力,了解智能创意电子套件的使用,激发创新思维,增加学习乐趣。

使用教程

将灯倾斜触发后,程序控制17颗灯珠渐变颜色。灯回正后,灯带停止渐变颜色。

组装说明

趣味台灯制作说明 点击下载
斜不胜正灯装配说明 点击下载


斜不胜正灯 装配.png

电子模块清单

模块名称 数量
W1控制板 x1
倾斜开关 x1
RGB灯带(17颗) x1

电子模块连接说明

模块 引脚 说明
倾斜开关 W1-9/10接口
RGB灯带(17颗) W1-7/8接口

Arduino程序/图形化程序

斜不胜正灯程序包下载

#include "Adafruit_NeoPixel.h"


#define SWITCHPIN  9

int numpixelsPin = 7;
#define nusec  5
#define NUMPIXELS   20

int num;
uint8_t r,g,b;
uint16_t h;

int led = 20;

int fz=0;
int flag=0;
int flag1=0;

int i = 0;
uint16_t cnt = 0;
Adafruit_NeoPixel pixels1 = Adafruit_NeoPixel(NUMPIXELS, numpixelsPin, NEO_GRB + NEO_KHZ800);

void HSV2RGB(uint16_t h, float s, float v, uint8_t * r, uint8_t * g, uint8_t *b);

void setup()
{
  pinMode(numpixelsPin,OUTPUT);
  pinMode(SWITCHPIN,INPUT);
  digitalWrite(numpixelsPin,LOW);  
  pinMode(nusec,OUTPUT);
  digitalWrite(nusec,HIGH);
  // put your setup code here, to run once:
  pixels1.begin(); // This initializes the NeoPixel library.
  for(num = 0; num < led; num++) 
  {
    pixels1.setPixelColor(num, pixels1.Color(0,0,0)); // Moderately bright green color.
  }
  pixels1.show(); // This sends the updated pixel color to the hardware    
  for(num = 0; num < led; num++) 
  {
    pixels1.setPixelColor(num, pixels1.Color(128,0,0)); // Moderately bright green color.
    pixels1.show(); // This sends the updated pixel color to the hardware
    delay(65);
  }
  for(num = (led-1); num >= 0; num--) 
  {
    pixels1.setPixelColor(num, pixels1.Color(0,128,0)); // Moderately bright green color.
    pixels1.show(); // This sends the updated pixel color to the hardware
    delay(65);
  }
  for(num = 0; num < led; num++) 
  {
    pixels1.setPixelColor(num, pixels1.Color(0,0,128)); // Moderately bright green color.
    pixels1.show(); // This sends the updated pixel color to the hardware
    delay(65);
  }    
//  Serial.begin(115200);
}

void loop() 
{
  if(digitalRead(SWITCHPIN))
  {    
      h += 2;
      if(h>360)
      {
        h=0;
      }
       HSV2RGB(h, 1.0, 1.0, &r, &g, &b);
      
        for(num = 0; num < led; num++) 
        {
          pixels1.setPixelColor(num, pixels1.Color(r,g,b)); // Moderately bright green color.
        }
        pixels1.show(); // This sends the updated pixel color to the hardware
        
        digitalWrite(nusec,LOW);     //ying yue  
        delay(50);      
   }
   else 
   {
      for(num = 0; num < led; num++) 
      {
        pixels1.setPixelColor(num, pixels1.Color(r,g,b)); // Moderately bright green color.
      }
      pixels1.show(); // This sends the updated pixel color to the hardware   
      digitalWrite(nusec,HIGH);    //ying yue
      delay(50); 
  }     
}

void HSV2RGB(uint16_t h, float s, float v, uint8_t * r, uint8_t * g, uint8_t *b)
{
  uint8_t hi;
  float f, p, q, t;
  hi = (uint8_t)(h / 60);
  f = (float)h/60 - hi;
  p = v * (1 - s);
  q = v * (1 - f * s);
  t = v * (1 - (1 - f) * s);
  switch(hi)
  {
    //0: {r,g,b} = {v,t,p}
    case 0:
      *r = v * 255;
      *g = t * 255;
      *b = p * 255;
      break;
    //1: {r,g,b} = {q,v,p}
    case 1:
      *r = q * 255;
      *g = v * 255;
      *b = p * 255;
      break;
    //2: {r,g,b} = {p,v,t}
    case 2:
      *r = p * 255;
      *g = v * 255;
      *b = t * 255;
      break;
    //3: {r,g,b} = {p,q,v}
    case 3:
      *r = p * 255;
      *g = q * 255;
      *b = v *255;
      break;
    //4: {r,g,b} = {t,p,v}
    case 4:
      *r = t * 255; 
      *g = p * 255;
      *b = v * 255;
      break;
    //5: {r,g,b} = {v,p,q}
    case 5:
      *r = v * 255;
      *g = p * 255;
      *b = q * 255;
      break;
    default:
      break;
  }
}

FAQ

版本历史记录

Version Date 新增/删除/修复